Monday, July 11, 2011

MSI announces its first motherboard socket FM1

MSI has just announced its first motherboard socket FM1 format compatible with ATX AMD Llano. The card-A75A G35 takes full advantage of all the features of the AMD chipset Lynx A75. Equipped with 7 expansion slots, using a 4-phase power circuitry, and only two slots for dual-channel DDR3 memory (up to DDR3-1866 MHz).

Connectivity is ensured by DVI outputs, D-Sub and HDMI with 7.1 channel audio, Gigabit Ethernet, 4 USB 3.0 ports and several USB 2.0 ports. There is no eSATA connector for which all the connections offered by the chipsets have been around for six SATA 6 Gb / s internal.

Asus F1A75: New series of motherboards designed for AMD Llano

Asus has introduced its new motherboards based on AMD A75 chipset and designed for AMD Llano has a digital power supply design DIGI + VRM and BIOS UEFI intuitive interface. F1A75-V model EVO is the first motherboard with socket FM1 include support for ATI CrossFireX with dual PCI-Express x8/x8. All ASUS F1A75 series offers native support for USB 3.0 and SATA 6Gbps.

F1A75 series are based on chipset AMD A75 FM1 and socket compatible with AMD's new APU. This new series also has integrated graphics processors AMD Radeon HD 6000 Graphics Dual AMD support. Using a PCI-Express GPU Radeon additional Dual Radeon Graphics mode, the system performance can improve by up to 128%.

Sunday, July 10, 2011

ADATA presents his 8GB XPG Gaming Series memoirs

ADATA has unveiled its new RAM modules called XPG Gaming Serie  with a capacity of 8GB and low voltage. Under the nomenclature DDR3L XPG Gaming Series 1333G, ADATA already have your new RAM, 8GB capacity, low voltage, 1.35V only estimated at a good ability to overclock and performance. Latencies of 9-9-9-24 presented and some aluminum heatsinks for better cooling, to XPG DDR3L 1333G Gaming Series are available in a single module in an 8 GB and 16 GB dual kit (2x8GB).

GlacialTech launches series of CPU coolers for AMD A200

GlacialTech launches A200 series CPU coolers for AMD 65W sockets FM1/AM2/AM2 + and AM3. There are four areas to provide ventilation flow components near the CPU. GlacialTech has put forward a simple and inexpensive heatsink for AMD processors up to 65W TDP, the new A200 has a very small and a low sound level.

All this with a simple installation process.

Saturday, July 9, 2011

Tegra 3: anti-aliasing and output in September

Tegra 3, aka Kal-El, is the next mobile chip from NVIDIA. The SoC (chip all-in-one) should land at the end of the summer (apparently the end of September) and will propose some new face Tegra 2. First, it will go from two cores to four type Cortex A9, which can be useful in some applications. Second, the SIM has been added to the cores, was one of the (few) flaws Tegra 2.

SIMD "ARM", NEON, makes it possible to overcome the lack of FPU chips and software like Flash Player is already optimized. Finally, the GPU should be from 8 to 12 "cores," although the concept is rather vague in the case of Tegra. And this increase in power will actually be used: NVIDIA should propose a solution to the anti-aliasing.

Corsair H80 and H100 Series Hydro already available

Corsair has just announced their new H80 and H100 Series Hydro, highly effective liquid cooling and easy installation for those who want to start using this type of cooling. Its much refrigeration unit with a small footprint so it does not have problems when being installed in small cases or by the type of RAM you use, if they have a high sink.

It features a digital fan control so you can choose to have the fans off, use a balanced or at peak performance. The H80 model features a 120mm fan, but optionally you can add the same size. The H100 comes with two 120mm fans combined with a double radiator.

VP450 VP350 and Antec: New models for the range Basiq! Power

Antec has presented its new food sources and VP350 VP450 Basiq belonging to the range! Power, equipped with quality components Antec own brand. The new power supplies deliver 350W VP350 and Vp450 and 450W respectively, to incorporate some protection against over voltage, over voltage, short circuit protection and energy security, with security a section to substantiate a quality power supply.